ID: 887
Description
I have upgraded the speaker to a Celestion Vintage G12.
Designed and engineered in Great Britain, the CUB12R delivers pure, vintage tube tone in a small format, low wattage combo providing classic vintage sounds without complicated control layouts or excessive volume levels. From 15 watts to less than 1 watt the CUB12R delivers warm cleans to rich crunch, giving all the classic tones you need.The CUB12R is great at home, on stage or in the studio. Great tube tone has never been more accessible.
Class AB
A Class AB power section is based on the notion that music is a waveform and linear in nature ? i.e. you only get a +ve section followed by a -ve section, you never get a +ve & -ve occurring at the same time. In a Class AB amplifier, the input signal is split into the +ve and the -ve sides of the waveform and each respective part is sent to a separate tube or tubes and amplified accordingly
Celestion Vintage 30 G12
The Vintage 30 is Celestion?s flagship amp speaker. Introduced in 1986 when spandex rock and over-the-top hair metal was at its absolute peak, the much-loved Celestion Vintage 30 quickly became a favourite among amp and cabinet manufacturers and remains an industry standard to this day - captured on countless recordings and used by the likes of Slash, Peter Frampton and Mark Tremonti.
In terms of its construction, the V30 combines Celestion?s proprietary ?H? magnet (close in performance to Alnico) with a unique cone design and voice coil made from modern materials - yielding warm lows, rich mids and detailed highs. In Celestion?s own words, the Vintage 30 is their most ?revealing speaker?; ensuring that all of the harmonic complexities of any connected amplifier are projected. Although the Celestion Vintage 30 is a versatile speaker, it?s most apt at handling high-powered valve amplifiers with its 60-watt power rating - allowing them to breathe with plenty of stage-filling headroom.
Selectable Power 15 watts or Less than 1 watt
Allows you to drive the output stage of the amplifier harder at reduced output levels should you need to use the unit in situations where full volume is not appropriate.
On-Board Reverb
On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.
FX Loop
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay ? try it.
Specifications
Channel Controls: Gain, Treble, Middle, Bass, Volume & Tone
Class: Class A/B
Packed Dimensions (HxWxD mm): 455 x 475 x 275
Drivers: 12\" HH Driver
Equalisation: Bass, Middle, Treble
Footswitch: FS1 (Not Included)
FX Loop(s): Yes
Impedance: 8 Ohm
Inputs: 2 : 15W & <1W
Output Valves: 2 x EL84
Power: 15 Watts & < 1 Watt
Preamp Valves: 3 x ECC83
Reverb: Yes
Speaker connections: 8 - 16 Ohm connections
Designed and engineered in Great Britain, the CUB12R delivers pure, vintage tube tone in a small format, low wattage combo providing classic vintage sounds without complicated control layouts or excessive volume levels. From 15 watts to less than 1 watt the CUB12R delivers warm cleans to rich crunch, giving all the classic tones you need.The CUB12R is great at home, on stage or in the studio. Great tube tone has never been more accessible.
Class AB
A Class AB power section is based on the notion that music is a waveform and linear in nature ? i.e. you only get a +ve section followed by a -ve section, you never get a +ve & -ve occurring at the same time. In a Class AB amplifier, the input signal is split into the +ve and the -ve sides of the waveform and each respective part is sent to a separate tube or tubes and amplified accordingly
Celestion Vintage 30 G12
The Vintage 30 is Celestion?s flagship amp speaker. Introduced in 1986 when spandex rock and over-the-top hair metal was at its absolute peak, the much-loved Celestion Vintage 30 quickly became a favourite among amp and cabinet manufacturers and remains an industry standard to this day - captured on countless recordings and used by the likes of Slash, Peter Frampton and Mark Tremonti.
In terms of its construction, the V30 combines Celestion?s proprietary ?H? magnet (close in performance to Alnico) with a unique cone design and voice coil made from modern materials - yielding warm lows, rich mids and detailed highs. In Celestion?s own words, the Vintage 30 is their most ?revealing speaker?; ensuring that all of the harmonic complexities of any connected amplifier are projected. Although the Celestion Vintage 30 is a versatile speaker, it?s most apt at handling high-powered valve amplifiers with its 60-watt power rating - allowing them to breathe with plenty of stage-filling headroom.
Selectable Power 15 watts or Less than 1 watt
Allows you to drive the output stage of the amplifier harder at reduced output levels should you need to use the unit in situations where full volume is not appropriate.
On-Board Reverb
On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.
FX Loop
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay ? try it.
Specifications
Channel Controls: Gain, Treble, Middle, Bass, Volume & Tone
Class: Class A/B
Packed Dimensions (HxWxD mm): 455 x 475 x 275
Drivers: 12\" HH Driver
Equalisation: Bass, Middle, Treble
Footswitch: FS1 (Not Included)
FX Loop(s): Yes
Impedance: 8 Ohm
Inputs: 2 : 15W & <1W
Output Valves: 2 x EL84
Power: 15 Watts & < 1 Watt
Preamp Valves: 3 x ECC83
Reverb: Yes
Speaker connections: 8 - 16 Ohm connections